Post by leo on Oct 17, 2011 23:22:47 GMT -5
a thread to post the tools you use when servicing your 250cc scooter.
my tools:
6.5 inch crescent wrench.
throttle cable wrench.
3 allen wrenches, 1/8 inch, 5mm, 6mm.
strap wrench.
5 inch "stubby" bit driver.
2 flathead and 2 phillips bits.
6 hex head bits, 8mm through 13mm
3 inch bit driver extension.
7.5 inch 3/8 drive ratchet.
4 sockets 3/8 drive, 12mm, 13mm, 14mm, 17mm
3 inch 3/8 drive extension.
3/8 drive to 1/4 drive adapter.
3 sockets 1/4 drive, 8mm, 10mm, 11mm.
2 inch 1/4 drive extension.
13 inch 1/2 inch drive breaker bar.
2 sockets 1/2 drive 21mm, 22mm.
sharp knife.
wire nuts, wire spade, fork, and butt connectors.
zip ties.
crimping tool.
3 drill bits that fit my bit driver.
pencil type tire gauge. (checked at local tire shop).
my tools:
6.5 inch crescent wrench.
throttle cable wrench.
3 allen wrenches, 1/8 inch, 5mm, 6mm.
strap wrench.
5 inch "stubby" bit driver.
2 flathead and 2 phillips bits.
6 hex head bits, 8mm through 13mm
3 inch bit driver extension.
7.5 inch 3/8 drive ratchet.
4 sockets 3/8 drive, 12mm, 13mm, 14mm, 17mm
3 inch 3/8 drive extension.
3/8 drive to 1/4 drive adapter.
3 sockets 1/4 drive, 8mm, 10mm, 11mm.
2 inch 1/4 drive extension.
13 inch 1/2 inch drive breaker bar.
2 sockets 1/2 drive 21mm, 22mm.
sharp knife.
wire nuts, wire spade, fork, and butt connectors.
zip ties.
crimping tool.
3 drill bits that fit my bit driver.
pencil type tire gauge. (checked at local tire shop).