|
Post by ifly1956 on Apr 8, 2009 8:07:19 GMT -5
Since the handlebars are covered by plastic, how have you mounted your GPS ? I have two different GPS's I can use. One is the Garmin NUVI 200w, the other is an older Garmin Street pilot. I don't want to use the suction mount - I think it would vibrate off the windshield.
How have you done it ?
PS - I have some long rides planned, and I've tried the folding map thing, and it didn't work.
Thanks, IFLY
|
|
|
Post by barry on Apr 8, 2009 9:13:36 GMT -5
Depends on your bike. For some the suction cup works fine if the windshield is flat enough others use a clamp and mount the bracket on ether handlebar. I have a MC-D54B so we were able to hard mount and hard wire mine in the center of the handlebars. I posted in Powerscooters.org : powerscooters.org/cgi-bin/discuss/YaBB.pl?num=1217114175barry
|
|
|
Post by cat0020 on Apr 8, 2009 9:54:03 GMT -5
Do a search, I've posted many images about my GPS mounting: The GPS mount and power cord are routed through handlebr switches: Yes, the GPS unit blocks the speedo, but it displays more accurate speed anyway. The RAM mounting ball in mounted on the metal bracket that holds the handlebar and cover, vibration is minimal in motion, going over rough terrain may cause difficulety to read, but suspension mod would improve that... add to list to upgrade. SAE power outlet to allow easy access for battery tender and electric clothing if needed.. I guess I would turn off the headlights to use the heated clothing.
|
|
|
Post by dumbass on Apr 8, 2009 10:23:37 GMT -5
Since the handlebars are covered by plastic, how have you mounted your GPS ? I have two different GPS's I can use. One is the Garmin NUVI Thanks, IFLY As cat0020 said you really need to do a search and you will find this question has been asked and answered at least once. Her's how I mounted mine. I like it this way because it doesn't block the gauges even the idiot lights and it's easy to read even on sunny days.
|
|
|
Post by okie34 on Apr 9, 2009 8:40:32 GMT -5
I've got a Tomtom One XL. I too was concerned with the suction mount. However, I bit the bullet and tried it anyway. I drove over 300 miles using that mount and it never wavered.
That IS entirely dependant on your windshield though. Too much curve and it will reduce the ability of the suction mount to hold over time.
I would give it a try though. Put the suction mount on (without the GPS) and leave it overnight. Next day, give it a good pull. If it it's loose, you'll know it. If it's reasonably solid, put the GPS on and leave it for a while. Again (if it's secure) leave it over night (tape it or tie it off somewhere so it doesn't hit the ground if the mount fails, but do not take any of the stress off the mount). Again, check it by giving it a good tug. If iti's still reasonably solid, go riding. Check the mount frequently while taking a good scenic route. You will figure pretty fast if the mount will work out or not.
At the very least, you may save yourself some cash!
JD
|
|